Description

Specification
Fire Protection Foam 240 is used to seal door frames and linear gaps throughout the fire rated areas of a building. | Tested to BS EN 1634-1 (fire door): FD60 performance achieved.

Tested to BS EN 1366-4 (linear gaps) : up to 4 hours fire resistance (coated or uncoated).

Tested without architrave (fire door).

Tested with plastic packers (fire door).

Gaps up to 35 mm (fire door).

Excellent acoustic performance – up to 62 dB.

Tack free in 10 minutes. | Tested to BS EN 1634-1 (fire door): FD60 performance achieved. | Tested to BS EN 1366-4 (linear gaps) : up to 4 hours fire resistance (coated or uncoated). | Tested without architrave (fire door). | Tested with plastic packers (fire door). | Gaps up to 35 mm (fire door). | Excellent acoustic performance – up to 62 dB. | Tack free in 10 minutes. | Tested to BS EN 1634-1 (fire door): FD60 performance achieved.

Tested to BS EN 1366-4 (linear gaps) : up to 4 hours fire resistance (coated or uncoated). | Tested to BS EN 1634-1 (fire door): FD60 performance achieved. | Tested to BS EN 1366-4 (linear gaps) : up to 4 hours fire resistance (coated or uncoated).
Application
Application area | Ensure suitability of product prior to use. Protectect all surrounding areas & substrates which are required to remain free of Fire Protection Foam 240, using a suitable protective barrier. The surfaces must be solid and stable. Remove all loose particles, dust and grease. A speedier cure can be attained by moistening the substrates if needed. | Instructions | Immediately prior to use, shake the canister vigorously at least 20 times.

Remove the protection cap and screw on to PU foam gun.

Fill approximately 80% of the required depth of the cavity because the foam will expand.

Work upwards on all vertical surfaces.

The foam is firmly set in 1 hour (depending on the temperature and humidity); excess can be trimmed with a suitable cutting knife.

Applying a light misting of clean water between each layer before subsequent application will permit faster cure and increase density. | Immediately prior to use, shake the canister vigorously at least 20 times. | Remove the protection cap and screw on to PU foam gun. | Fill approximately 80% of the required depth of the cavity because the foam will expand. | Work upwards on all vertical surfaces. | The foam is firmly set in 1 hour (depending on the temperature and humidity); excess can be trimmed with a suitable cutting knife. | Applying a light misting of clean water between each layer before subsequent application will permit faster cure and increase density.
Tehnical Information
Contents: 880 ml | Container: Aerosol canister | Colour: Beige | Fire resistance rating: B1 | Yield (volume) approx.: 45 l | Can be cut after: 60 min | Min. processing temperature: 5 °C | Max. processing temperature: 30 °C | Min. ambient processing temperature: 5 °C | Conditions to maintain shelf life from production: at 10°C to 25°C | Shelf life from production: 12 Month