Description

For sealing flanges and surfaces with a large gap up to max. 0.5 mm. Replacement for solid seals.
High degree of gap-bridging

Completely fills extensive surface roughnesses

100 % seal

Gaps are filled so that the resulting bonding provides protection against corrosion caused by friction and protection against rust.

Medium strength

Removable

Slight flexibility

Compensates expansion difference between different materials

The accordion bottle makes it easy to empty residual product

Resistant to a large number of bases, gases, solvents, oils and fuels

Silicone-free, solvent-free and oil-free

Proof of Performance
NSF registered, Class S2, sealants – no direct contact with food
NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water
Notice
The following plastics can be affected in the event of prolonged exposure: ABS, celluloid, polystyrene, polycarbonate (Macrolon), PMMA (Plexiglas), polysulfone, SAN (lurane, Tyril), Vinidur, vulcanized fiber, and painted surfaces.

Application area

• • NSF registered, Class S2, sealants – no direct contact with food

• NSF-tested in accordance with NSF/ANSI 61 for use in service water and drinking water

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no liability is assumed in relation to the provision of this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and further develop products. Please observe the technical data sheet!