Description

Specification
High load-bearing spacer installation system with thermal separation on insulated and non-insulated surfaces. With pre-assembled threaded rod made of A4 stainless steel | Quick and easy installation | Thermal bridge-reduced element for connecting and transferring loads from the attached part to the substrate | The thermal separation adapter in a plastic cone interrupts the thermal bridge and prevents heat loss to the outside. | Secure attachment with approval for high loads in a wide range of building materials | When anchoring in a substrate with the injection mortars WIT-VM 250, WIT-VM 200 and WIT PM 200 | Usable lengths from 80 to 300 mm can be covered with an AMO-Therm | Individual and flexible length setting using the adapter with commercially available threaded rods with acceptance test certificate 3.1
Application
Application area | Attachment with low thermal loss to insulated substrates indoors and outdoors, in walls, facing insulation on ceilings, non-bearing façades | e.g. awnings, canopies, post box systems, satellite systems, lighting equipment, light wells, air-conditioning units, brackets, grids, metal structures, balcony railings, balcony privacy screens, etc. | Can be used in different building materials | Solid and hollow sand-lime brick, normal and lightweight concrete, cracked and non-cracked concrete, aerated concrete, solid and vertically perforated brick | Can be used outdoors, in humid areas and close to the sea | External parts made from stainless steel. | Suitable for pre-positioned installation
Tehnical Information
Connection thread (1): M12 | Material of connection thread (2): Stainless steel A4 | Diameter threaded rod (3): M12 | Material of threaded rod (4): Stainless steel A4 | Length (5): 310 mm