Description

Specification
High quality plastic cavity anchor for attachment to panel materials | Anchor made of high-quality polyamide (nylon) | For fastening to panel materials up to 19 mm in thickness | No spinning in drill hole | Due to anti-rotation lock on collar, where correct drill hole diameter is selected | Anchor expands in cavity automatically | No assembly set tool required | For assembly, we recommend the ASSY®-D screw ∅ 4-5 mm | ® | Can also be used in solid construction materials | Notice | To be used in conjunction with ASSY®-D screw ∅ 4-5 mm or wood and chipboard screw diameter 4-5 mm without drill tip, ring thread, counter thread

For secondary fastenings

Tighten screw by hand only — do not use a cordless screwdriver

When tightening the screw, ensure that the screw is not over-tightened (danger of breaking) | To be used in conjunction with ASSY®-D screw ∅ 4-5 mm or wood and chipboard screw diameter 4-5 mm without drill tip, ring thread, counter thread | ® | For secondary fastenings | Tighten screw by hand only — do not use a cordless screwdriver | When tightening the screw, ensure that the screw is not over-tightened (danger of breaking) | Drill the hole
Insert peg
Knock in anchor until flush
Tighten screw with screwdriver | Drill the hole | Drill the hole | Insert peg | Insert peg | Knock in anchor until flush | Knock in anchor until flush | Tighten screw with screwdriver | Tighten screw with screwdriver
Application
Application area | For fastening to gypsum plasterboard, gypsum fibreboard, hard fibre, chipboard and other panel materials and boards of up to 19 mm thickness

For mounting light attachments such as rails, sheet metal, information signs, small picture frames etc. | For fastening to gypsum plasterboard, gypsum fibreboard, hard fibre, chipboard and other panel materials and boards of up to 19 mm thickness | For mounting light attachments such as rails, sheet metal, information signs, small picture frames etc.
Tehnical Information
Type description: W-KH | Anchor diameter: 10 mm | Anchor length (l) (l): 50 mm | Max. attachment height (d a): 13 mm | Material: PA – Polyamide | Min. required screw diameter: 4 mm | Max. required screw diameter: 5 mm | Hole diameter in component (d Bau): 6 mm | Required screw length (l s): 40 mm + thickness of the add-on part | Nominal drill diameter (d 0) – condition: 8 (concrete) – 10 (other substrates) | Drill hole depth (t): 55 mm | Min. attachment height (d a) (da): 9 mm | Anchor diameter [mm]: 10 | Solid brick: 0,2 | Vertically perforated brick: 0,1 | Hollow sand-lime brick: 0,2 | Gypsum plasterboard
d = 12 mm: 0,08 | Solid brick: 0,4 | Vertically perforated brick: 0,3 | Hollow sand-lime brick: 0,4 | Gypsum plasterboard
d = 12 mm: 0,2