Description

Specification
With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using in-place installation. Wall plug body with countersunk, nail made of zinc-plated steel | Quick, cost-effective installation

Anchor and nail screw are pre-assembled, no need to search for a suitable screw

Suitable for in-place installation

Can be removed via drive in screw head

Defined integrated hammer-in stop prevents premature expansion

Resistant to UV rays

Rot-resistant (plastic anchor made of high-quality polyamide)

Temperature-resistant from -40°C to +100°C

For countersunk and protruding finish

Countersunk head design countersinks itself automatically in soft wood

Halogen-free | Quick, cost-effective installation | Anchor and nail screw are pre-assembled, no need to search for a suitable screw | Suitable for in-place installation | Can be removed via drive in screw head | Defined integrated hammer-in stop prevents premature expansion | Resistant to UV rays | Rot-resistant (plastic anchor made of high-quality polyamide) | Temperature-resistant from -40°C to +100°C | For countersunk and protruding finish | Countersunk head design countersinks itself automatically in soft wood | Halogen-free | Proof of Performance | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for multiple use in concrete for non-structural applications

European Technical Assessment ETA-19/0182: SHARK® Hammer 8 for multiple use in masonry for non-structural applications (exception: dimensions M8 x 45) | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for multiple use in concrete for non-structural applications | ® | European Technical Assessment ETA-19/0182: SHARK® Hammer 8 for multiple use in masonry for non-structural applications (exception: dimensions M8 x 45) | ® | Performance data
Characteristic values
Anchor diameter [mm] 6 8
Permissible tensile load Concrete B25 or C20/25 Fperm [kN] 0,2 0,2
Sand-lime brick KS 12 – 0,12
Hollow sand-lime brick KSL 12 – 0,075
Tightening torque (THREAD type only) Tinst [Nm] 4 4
Drill hole depth h1 ≥ [mm] 35 45
Setting depth hnom ≥ [mm] 30 40
Thread dia. (THREAD type only) dthr [mm] M6 M8
Thread length (THREAD type only) Ithr [mm] 6 9
Nom. drill dia. d0 [mm] 6 8
Hole dia. in comp. df [mm] 6,5 8,5 | Performance data
Characteristic values
Anchor diameter [mm] 6 8
Permissible tensile load Concrete B25 or C20/25 Fperm [kN] 0,2 0,2
Sand-lime brick KS 12 – 0,12
Hollow sand-lime brick KSL 12 – 0,075
Tightening torque (THREAD type only) Tinst [Nm] 4 4
Drill hole depth h1 ≥ [mm] 35 45
Setting depth hnom ≥ [mm] 30 40
Thread dia. (THREAD type only) dthr [mm] M6 M8
Thread length (THREAD type only) Ithr [mm] 6 9
Nom. drill dia. d0 [mm] 6 8
Hole dia. in comp. df [mm] 6,5 8,5 | Performance data
Characteristic values
Anchor diameter [mm] 6 8
Permissible tensile load Concrete B25 or C20/25 Fperm [kN] 0,2 0,2
Sand-lime brick KS 12 – 0,12
Hollow sand-lime brick KSL 12 – 0,075
Tightening torque (THREAD type only) Tinst [Nm] 4 4
Drill hole depth h1 ≥ [mm] 35 45
Setting depth hnom ≥ [mm] 30 40
Thread dia. (THREAD type only) dthr [mm] M6 M8
Thread length (THREAD type only) Ithr [mm] 6 9
Nom. drill dia. d0 [mm] 6 8
Hole dia. in comp. df [mm] 6,5 8,5 | Performance data | Performance data | Characteristic values | Characteristic values | Anchor diameter [mm] 6 8 | Anchor diameter [mm] | 6 | 8 | Permissible tensile load Concrete B25 or C20/25 Fperm [kN] 0,2 0,2 | Permissible tensile load | Concrete B25 or C20/25 | Fperm [kN] | 0,2 | 0,2 | Sand-lime brick KS 12 – 0,12 | Sand-lime brick KS 12 | – | 0,12 | Hollow sand-lime brick KSL 12 – 0,075 | Hollow sand-lime brick KSL 12 | – | 0,075 | Tightening torque (THREAD type only) Tinst [Nm] 4 4 | Tightening torque (THREAD type only) | Tinst [Nm] | inst | n | 4 | 4 | Drill hole depth h1 ≥ [mm] 35 45 | Drill hole depth | h1 ≥ [mm] | 1 | 35 | 45 | Setting depth hnom ≥ [mm] 30 40 | Setting depth | hnom ≥ [mm] | nom | 30 | 40 | Thread dia. (THREAD type only) dthr [mm] M6 M8 | Thread dia. (THREAD type only) | dthr [mm] | thr | M6 | M8 | Thread length (THREAD type only) Ithr [mm] 6 9 | Thread length (THREAD type only) | Ithr [mm] | thr | 6 | 9 | Nom. drill dia. d0 [mm] 6 8 | Nom. drill dia. | d0 [mm] | 0 | 6 | 8 | Hole dia. in comp. df [mm] 6,5 8,5 | Hole dia. in comp. | df [mm] | f | 6,5 | 8,5 | Application area | Square timbers | Square timbers | Square timbers | Drill the hole
Remove drill cuttings
Anchor sleeve temperature ≥ 0 °C
Temperature in base material ≥ 0 °C
Insert anchor through the component into the drilled hole
Knock in expansion nail until flush | Drill the hole | Drill the hole | Drill the hole | Remove drill cuttings | Remove drill cuttings | Remove drill cuttings | Anchor sleeve temperature ≥ 0 °C | Anchor sleeve temperature ≥ 0 °C | Anchor sleeve temperature ≥ 0 °C | Temperature in base material ≥ 0 °C | Temperature in base material ≥ 0 °C | Temperature in base material ≥ 0 °C | Insert anchor through the component into the drilled hole | Insert anchor through the component into the drilled hole | Insert anchor through the component into the drilled hole | Knock in expansion nail until flush | Knock in expansion nail until flush | Knock in expansion nail until flush | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for multiple use in concrete for non-structural applications

European Technical Assessment ETA-19/0182: SHARK® Hammer 8 for multiple use in masonry for non-structural applications (exception: dimensions M8 x 45) | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for multiple use in concrete for non-structural applications | ® | European Technical Assessment ETA-19/0182: SHARK® Hammer 8 for multiple use in masonry for non-structural applications (exception: dimensions M8 x 45) | ®
Application
Application area | Can be used in concrete and masonry

For any light-load fittings in interior finishing as well as wood, metal, plumbing, sanitary and electrical applications, e.g. securing squared timber, laths, thin metal sheets and all components for recessed installation | Can be used in concrete and masonry | For any light-load fittings in interior finishing as well as wood, metal, plumbing, sanitary and electrical applications, e.g. securing squared timber, laths, thin metal sheets and all components for recessed installation
Tehnical Information
Anchor diameter: 8 mm | Anchor length (l): 120 mm | Max. attachment height (t fix): 80 mm | Embedding depth (h nom): 40 mm | Nominal drill-bit diameter (d 0): 8 mm | Drill hole depth (h 1): 45 mm | Hole diameter in component (d f): 8.5 mm | Material of nail: Steel | Surface: Zinc plated | Internal drive: Z3