Description

Specification
With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using push-through installation. Wall plug body with mushroom collar, nail made of zinc-plated steel | Quick, cost-effective installation

Anchor and nail screw are pre-assembled

Suitable for in-place installation

Can be removed via drive in screw head

Ideal for slots thanks to large contact surface

Defined integrated hammer-in stop prevents premature expansion

Resistant to UV rays

Rot-resistant (plastic anchor made of high-quality polyamide)

Temperature-resistant from -40°C to +100°C

For countersunk and protruding finish

Halogen-free | Quick, cost-effective installation | Anchor and nail screw are pre-assembled | Suitable for in-place installation | Can be removed via drive in screw head | Ideal for slots thanks to large contact surface | Defined integrated hammer-in stop prevents premature expansion | Resistant to UV rays | Rot-resistant (plastic anchor made of high-quality polyamide) | Temperature-resistant from -40°C to +100°C | For countersunk and protruding finish | Halogen-free | Proof of Performance | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for use in a redundant system in concrete for non-structural applications | ® | Notice | European Technical Assessment ETA-19/0182: Multiple attachment of non-load-bearing systems in concrete SHARK® Hammer 6, 8 | European Technical Assessment ETA-19/0182: Multiple attachment of non-load-bearing systems in concrete SHARK® Hammer 6, 8 | ® | Performance data
Setting depth hnom ≥ [mm] 30 40
Thread dia. (THREAD type only) dthr [mm] M6 M8
Thread length (THREAD type only) Ithr [mm] 6 9
Nom. drill dia. d0 [mm] 6 8
Hole dia. in comp. df [mm] 6,5 8,5
Anchor diameter [mm] 6 8
Permissible tensile load Concrete B25 or C20/25 Fperm [kN] 0,2 0,2
Sand-lime brick KS 12 – 0,12
Hollow sand-lime brick KSL 12 – 0,075
Characteristic values
Tightening torque (THREAD type only) Tinst [Nm] 4 4
Drill hole depth h1 ≥ [mm] 35 45 | Performance data
Setting depth hnom ≥ [mm] 30 40
Thread dia. (THREAD type only) dthr [mm] M6 M8
Thread length (THREAD type only) Ithr [mm] 6 9
Nom. drill dia. d0 [mm] 6 8
Hole dia. in comp. df [mm] 6,5 8,5
Anchor diameter [mm] 6 8
Permissible tensile load Concrete B25 or C20/25 Fperm [kN] 0,2 0,2
Sand-lime brick KS 12 – 0,12
Hollow sand-lime brick KSL 12 – 0,075
Characteristic values
Tightening torque (THREAD type only) Tinst [Nm] 4 4
Drill hole depth h1 ≥ [mm] 35 45 | Performance data
Setting depth hnom ≥ [mm] 30 40
Thread dia. (THREAD type only) dthr [mm] M6 M8
Thread length (THREAD type only) Ithr [mm] 6 9
Nom. drill dia. d0 [mm] 6 8
Hole dia. in comp. df [mm] 6,5 8,5
Anchor diameter [mm] 6 8
Permissible tensile load Concrete B25 or C20/25 Fperm [kN] 0,2 0,2
Sand-lime brick KS 12 – 0,12
Hollow sand-lime brick KSL 12 – 0,075
Characteristic values
Tightening torque (THREAD type only) Tinst [Nm] 4 4
Drill hole depth h1 ≥ [mm] 35 45 | Performance data | Performance data | Setting depth hnom ≥ [mm] 30 40 | Setting depth | hnom ≥ [mm] | nom | 30 | 40 | Thread dia. (THREAD type only) dthr [mm] M6 M8 | Thread dia. (THREAD type only) | dthr [mm] | thr | M6 | M8 | Thread length (THREAD type only) Ithr [mm] 6 9 | Thread length (THREAD type only) | Ithr [mm] | thr | 6 | 9 | Nom. drill dia. d0 [mm] 6 8 | Nom. drill dia. | d0 [mm] | 0 | 6 | 8 | Hole dia. in comp. df [mm] 6,5 8,5 | Hole dia. in comp. | df [mm] | f | 6,5 | 8,5 | Anchor diameter [mm] 6 8 | Anchor diameter [mm] | 6 | 8 | Permissible tensile load Concrete B25 or C20/25 Fperm [kN] 0,2 0,2 | Permissible tensile load | Concrete B25 or C20/25 | Fperm [kN] | 0,2 | 0,2 | Sand-lime brick KS 12 – 0,12 | Sand-lime brick KS 12 | – | 0,12 | Hollow sand-lime brick KSL 12 – 0,075 | Hollow sand-lime brick KSL 12 | – | 0,075 | Characteristic values | Characteristic values | Tightening torque (THREAD type only) Tinst [Nm] 4 4 | Tightening torque (THREAD type only) | Tinst [Nm] | inst | n | 4 | 4 | Drill hole depth h1 ≥ [mm] 35 45 | Drill hole depth | h1 ≥ [mm] | 1 | 35 | 45 | Application area | ETICS skirting profiles | ETICS skirting profiles | ETICS skirting profiles | Drill the hole
Remove drill cuttings
Anchor sleeve temperature ≥ 0 °C
Temperature in base material ≥ 0 °C
Insert anchor through the component into the drilled hole
Knock in expansion nail until flush | Drill the hole | Drill the hole | Drill the hole | Remove drill cuttings | Remove drill cuttings | Remove drill cuttings | Anchor sleeve temperature ≥ 0 °C | Anchor sleeve temperature ≥ 0 °C | Anchor sleeve temperature ≥ 0 °C | Temperature in base material ≥ 0 °C | Temperature in base material ≥ 0 °C | Temperature in base material ≥ 0 °C | Insert anchor through the component into the drilled hole | Insert anchor through the component into the drilled hole | Insert anchor through the component into the drilled hole | Knock in expansion nail until flush | Knock in expansion nail until flush | Knock in expansion nail until flush | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for use in a redundant system in concrete for non-structural applications | ®
Application
Application area | Can be used in concrete and masonry

For any light-load fittings in interior finishing as well as wood, metal, plumbing and electrical applications, e.g. ETICS skirting profiles, brackets, panels, sheets, etc. | Can be used in concrete and masonry | For any light-load fittings in interior finishing as well as wood, metal, plumbing and electrical applications, e.g. ETICS skirting profiles, brackets, panels, sheets, etc.
Tehnical Information
Anchor diameter: 6 mm | Anchor length (l): 40 mm | Max. attachment height (t fix): 10 mm | Embedding depth (h nom): 30 mm | Nominal drill-bit diameter (d 0): 6 mm | Drill hole depth (h 1): 35 mm | Hole diameter in component (d f): 6.5 mm | Material of nail: Steel | Surface: Zinc plated | Internal drive: Z2