Description
Specification
With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using push-through installation. Wall plug body with flat collar nail made of zinc plated steel | Quick, cost-effective installation
Anchor and nail screw are pre-assembled, no need to search for a suitable screw
For use in push-through installation
Can be removed via drive in screw head
Defined integrated hammer-in stop prevents premature expansion
Resistant to UV rays
Rot-resistant (plastic anchor made of high-quality polyamide)
Temperature-resistant from -40°C to +100°C
For countersinking and leaving protruding
Countersunk head design countersinks itself automatically in soft wood
Halogen-free | Quick, cost-effective installation | Anchor and nail screw are pre-assembled, no need to search for a suitable screw | For use in push-through installation | Can be removed via drive in screw head | Defined integrated hammer-in stop prevents premature expansion | Resistant to UV rays | Rot-resistant (plastic anchor made of high-quality polyamide) | Temperature-resistant from -40°C to +100°C | For countersinking and leaving protruding | Countersunk head design countersinks itself automatically in soft wood | Halogen-free | Proof of Performance | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for anchors in a non-structural system based on a redundant design in concrete
European Technical Assessment ETA-19/0182: SHARK® Hammer 8 for anchors in a non-structural system based on a redundant design in masonry (exception: dimensions M8 x 45) | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for anchors in a non-structural system based on a redundant design in concrete | ® | European Technical Assessment ETA-19/0182: SHARK® Hammer 8 for anchors in a non-structural system based on a redundant design in masonry (exception: dimensions M8 x 45) | ® | Performance data
Anchor diameter [mm] 6 8
Permissible tensile load B25 or C20/25 concrete Fadm [kN] 0,2 0,2
Sand-lime brick KS 12 – 0,12
Hollow sand-lime brick KSL 12 – 0,075
Characteristic values
Tightening torque (THREAD type only) Tinst [Nm] 4 4
Drill hole depth h1 ≥ [mm] 35 45
Embedment depth hnom ≥ [mm] 30 40
Thread dia. (THREAD type only) dthr [mm] M6 M8
Thread length (THREAD type only) Ithr [mm] 6 9
Nominal drill diameter d0 [mm] 6 8
Hole diameter in component df [mm] 6,5 8,5 | Performance data
Anchor diameter [mm] 6 8
Permissible tensile load B25 or C20/25 concrete Fadm [kN] 0,2 0,2
Sand-lime brick KS 12 – 0,12
Hollow sand-lime brick KSL 12 – 0,075
Characteristic values
Tightening torque (THREAD type only) Tinst [Nm] 4 4
Drill hole depth h1 ≥ [mm] 35 45
Embedment depth hnom ≥ [mm] 30 40
Thread dia. (THREAD type only) dthr [mm] M6 M8
Thread length (THREAD type only) Ithr [mm] 6 9
Nominal drill diameter d0 [mm] 6 8
Hole diameter in component df [mm] 6,5 8,5 | Performance data
Anchor diameter [mm] 6 8
Permissible tensile load B25 or C20/25 concrete Fadm [kN] 0,2 0,2
Sand-lime brick KS 12 – 0,12
Hollow sand-lime brick KSL 12 – 0,075
Characteristic values
Tightening torque (THREAD type only) Tinst [Nm] 4 4
Drill hole depth h1 ≥ [mm] 35 45
Embedment depth hnom ≥ [mm] 30 40
Thread dia. (THREAD type only) dthr [mm] M6 M8
Thread length (THREAD type only) Ithr [mm] 6 9
Nominal drill diameter d0 [mm] 6 8
Hole diameter in component df [mm] 6,5 8,5 | Performance data | Performance data | Anchor diameter [mm] 6 8 | Anchor diameter [mm] | 6 | 8 | Permissible tensile load B25 or C20/25 concrete Fadm [kN] 0,2 0,2 | Permissible tensile load | B25 or C20/25 concrete | Fadm [kN] | 0,2 | 0,2 | Sand-lime brick KS 12 – 0,12 | Sand-lime brick KS 12 | – | 0,12 | Hollow sand-lime brick KSL 12 – 0,075 | Hollow sand-lime brick KSL 12 | – | 0,075 | Characteristic values | Characteristic values | Tightening torque (THREAD type only) Tinst [Nm] 4 4 | Tightening torque (THREAD type only) | Tinst [Nm] | inst | n | 4 | 4 | Drill hole depth h1 ≥ [mm] 35 45 | Drill hole depth | h1 ≥ [mm] | 1 | 35 | 45 | Embedment depth hnom ≥ [mm] 30 40 | Embedment depth | hnom ≥ [mm] | nom | 30 | 40 | Thread dia. (THREAD type only) dthr [mm] M6 M8 | Thread dia. (THREAD type only) | dthr [mm] | thr | M6 | M8 | Thread length (THREAD type only) Ithr [mm] 6 9 | Thread length (THREAD type only) | Ithr [mm] | thr | 6 | 9 | Nominal drill diameter d0 [mm] 6 8 | Nominal drill diameter | d0 [mm] | 0 | 6 | 8 | Hole diameter in component df [mm] 6,5 8,5 | Hole diameter in component | df [mm] | f | 6,5 | 8,5 | Application area | C-profile rails in dry walling
Cable ducts | C-profile rails in dry walling | C-profile rails in dry walling | Cable ducts | Cable ducts | Drill the hole
Remove drill cuttings
Anchor sleeve temperature ≥ 0 °C
Temperature in base material ≥ 0 °C
Insert anchor through the component into the drilled hole
Knock in expansion nail until flush | Drill the hole | Drill the hole | Drill the hole | Remove drill cuttings | Remove drill cuttings | Remove drill cuttings | Anchor sleeve temperature ≥ 0 °C | Anchor sleeve temperature ≥ 0 °C | Anchor sleeve temperature ≥ 0 °C | Temperature in base material ≥ 0 °C | Temperature in base material ≥ 0 °C | Temperature in base material ≥ 0 °C | Insert anchor through the component into the drilled hole | Insert anchor through the component into the drilled hole | Insert anchor through the component into the drilled hole | Knock in expansion nail until flush | Knock in expansion nail until flush | Knock in expansion nail until flush | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for anchors in a non-structural system based on a redundant design in concrete
European Technical Assessment ETA-19/0182: SHARK® Hammer 8 for anchors in a non-structural system based on a redundant design in masonry (exception: dimensions M8 x 45) | European Technical Assessment ETA-19/0182: SHARK® Hammer sizes 6 and 8 for anchors in a non-structural system based on a redundant design in concrete | ® | European Technical Assessment ETA-19/0182: SHARK® Hammer 8 for anchors in a non-structural system based on a redundant design in masonry (exception: dimensions M8 x 45) | ®
Application
Application area | Can be used in concrete and masonry
All fastenings in interior finishing as well as the wood, metal, plumbing, sanitation and electrical industries. For light loads | Can be used in concrete and masonry | All fastenings in interior finishing as well as the wood, metal, plumbing, sanitation and electrical industries. For light loads | Uses include: securing angle brackets, panels, metal sheets, cable ducts and any components for non-recessed installation
Tehnical Information
Anchor diameter: 6 mm | Anchor length (l): 50 mm | Max. attachment height (t fix): 20 mm | Embedding depth (h nom): 30 mm | Nominal drill-bit diameter (d 0): 6 mm | Drill hole depth (h 1): 35 mm | Hole diameter in component (d f): 6.5 mm | Material of nail: Steel | Surface: Zinc plated | Internal drive: Z2
