Description

Specification
The proven solution for secure fixtures in cavity walls. With bolt and nut | Excellent holding power due to spreading supporting elements with large contact radius

Simple setting with associated mounting pliers

Pre-assembled with threaded rod, washer and nut

Anti-rotation lock on the collar prevents movement in the drill hole

Threaded rod can be loosened without loss of holding power | Excellent holding power due to spreading supporting elements with large contact radius | Simple setting with associated mounting pliers | Pre-assembled with threaded rod, washer and nut | Anti-rotation lock on the collar prevents movement in the drill hole | Threaded rod can be loosened without loss of holding power | Proof of Performance | Fire resistance tested in hollow pumice | Notice | After the anchor has expanded, the standard screw belonging to the anchor can be replaced by another fastener with a metric thread of the same size, e.g. eye bolt, screw with a special head, A2/A4 brass screw, threaded rod etc. | The lugs on the collar (anti-rotation lock) must be bent straight for hard surfaces, e.g. tiles. Pushing the front lever on the ratchet pliers releases the ratchet pliers again. | Application area | Wall connection profiles, dry walling
Wall mirror
Wall units | Wall connection profiles, dry walling | Wall connection profiles, dry walling | Wall mirror | Wall mirror | Wall units | Wall units | Create the drill hole
Install anchor
Expand anchor fully with pliers
Secure component | Create the drill hole | Create the drill hole | Create the drill hole | Install anchor | Install anchor | Install anchor | Expand anchor fully with pliers | Expand anchor fully with pliers | Expand anchor fully with pliers | Secure component | Secure component | Secure component | Fire resistance tested in hollow pumice
Application
Application area | The anchor for secondary attachments in hollow and lightweight construction walls made of panel materials, and in hollow brick ceilings or hollow core ceilings up to a maximum thickness of 45 mm, behind which is a cavity

For attaching brackets, pipe clamps, wall ducts, small boilers, lamps, shelves, curtain rails, picture frames, slats and rails etc. | The anchor for secondary attachments in hollow and lightweight construction walls made of panel materials, and in hollow brick ceilings or hollow core ceilings up to a maximum thickness of 45 mm, behind which is a cavity | For attaching brackets, pipe clamps, wall ducts, small boilers, lamps, shelves, curtain rails, picture frames, slats and rails etc.
Tehnical Information
Type description: W-MH/B | Thread type x anchor diameter: M8 | Design: With threaded rod, washer and hexagon nut | Min./max. board thickness/mirror thickness (d a): 16-32 mm | Material: Steel | Nominal drill-bit diameter (d 0): 13 mm | Surface: Zinc plated | Sleeve length (lHü): 67 mm | Screw length: 95 mm | Through-hole in the component to be connected (d f): 9 mm | Anchor diameter [mm]: M8