Description

Specification
For bolts and screws with metric thread, for uncracked concrete, zinc-plated steel | Minimal effort required to insert anchor

Immediate load-bearing capacity — no waiting

No setting tools required

Can be set flush with surface: Attached parts can be removed/remounted at any time

Triple expansion sleeve to ensure even expansion and load distribution

Suitable for bolts and screws with a metric thread

Applying the specified torque during the anchoring process ensures secure installation

Load-controlled/torque-controlled expanding galvanised steel anchor in sizes M6–M12

Cotter-pin installation | Minimal effort required to insert anchor | Immediate load-bearing capacity — no waiting | No setting tools required | Can be set flush with surface: Attached parts can be removed/remounted at any time | Triple expansion sleeve to ensure even expansion and load distribution | Suitable for bolts and screws with a metric thread | Applying the specified torque during the anchoring process ensures secure installation | Load-controlled/torque-controlled expanding galvanised steel anchor in sizes M6–M12 | Cotter-pin installation | Proof of Performance | ETA-10/0255 for individual attachment, Option 7, non-cracked concrete, galvanised steel, M6–M12; dimensioned in accordance with the European Technical Approval Guidelines (ETAG) for “Metal Anchors for Use in Concrete”, Appendix C, measurement process A | Notice | The partial safety factors of the resistances regulated in the approval and a partial safety factor of the actions of yF = 1.4 have been taken into account. Please refer to the European Technical Approval Guidelines (ETAG), Appendix C, for information on combining tensile and transverse loads, influence of the edge distance and groups of anchors. | The concrete has normal reinforcement. Higher values are possible for higher concrete compressive strengths. | Compliant with approval if screws and threaded rods with acceptance test certificate 3.1 in accordance with EN 10204:2004 are proven to be the required material and to possess the mechanical properties stipulated in ETA-10/0255 | Create the drill hole
Clean the drill hole
Knock in anchor until flush
Mount component
Apply torque | Create the drill hole | Create the drill hole | Create the drill hole | Clean the drill hole | Clean the drill hole | Clean the drill hole | Knock in anchor until flush | Knock in anchor until flush | Knock in anchor until flush | Mount component | Mount component | Mount component | Apply torque | Apply torque | Apply torque | ETA-10/0255 for individual attachment, Option 7, non-cracked concrete, galvanised steel, M6–M12; dimensioned in accordance with the European Technical Approval Guidelines (ETAG) for “Metal Anchors for Use in Concrete”, Appendix C, measurement process A
Application
Application area | Can be used for medium to heavy loads

Suitable for fastening: Transfer lines on the ground requiring installation flush with the surface; steel structures, metal profiles, brackets, base plates, cable conduits, piping, mounting rails etc.

The anchor with European Technical Assessment for anchorage in reinforced or unreinforced normal weight concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206:2000-12

Can be used in concrete
The anchor may be used for anchorages with predominantly static loads or quasi-static loads

Individual fixing point: Anchorage with European Technical Assessment in uncracked concrete

May only be used in dry indoor conditions | Can be used for medium to heavy loads | Suitable for fastening: Transfer lines on the ground requiring installation flush with the surface; steel structures, metal profiles, brackets, base plates, cable conduits, piping, mounting rails etc. | The anchor with European Technical Assessment for anchorage in reinforced or unreinforced normal weight concrete with a strength class of min. C20/25 and max. C50/60 in accordance with EN 206:2000-12 | Can be used in concrete | The anchor may be used for anchorages with predominantly static loads or quasi-static loads | Individual fixing point: Anchorage with European Technical Assessment in uncracked concrete | May only be used in dry indoor conditions
Tehnical Information
Anchor diameter: 10 mm | Anchor length (l): 60 mm | Max. attachment height (t fix): 250 mm | Nominal drill-bit diameter (d 0): 14 mm | Drill hole depth (h 1): 70 mm | Effective anchoring depth (h ef): 51.5 mm | Through-hole in the component to be connected (d f): 12 mm | Material: Steel | Surface: Zinc plated