Description

Specification
For cost-effective and fast installation in gypsum plasterboard, without the need for pre-drilling or an additional setting tool, with hexagon drive | High-quality plastic

Attachment via mechanical interlock

Rapid installation, no setting tool or pre-drilling required, with cordless screwdriver and suitable bit for the relevant screw

The drive allows the anchor to be inserted using a PZ, AW or TX bit, as the hexagon head transfers the load

The twist lock is triggered by screwing in a screw. When the screw is unscrewed, the plasterboard plug does not turn in the reverse direction, but remains in the base material

Minimal space required behind panel (only 15 mm)

The component can be attached with wood screws or chipboard screws

The plasterboard plug and the screw can be inserted with the same bit

The lathe centre enables easy positioning and drilling into the panel

For installation, we recommend the ASSY®-D screw | High-quality plastic | Attachment via mechanical interlock | Rapid installation, no setting tool or pre-drilling required, with cordless screwdriver and suitable bit for the relevant screw | The drive allows the anchor to be inserted using a PZ, AW or TX bit, as the hexagon head transfers the load | The twist lock is triggered by screwing in a screw. When the screw is unscrewed, the plasterboard plug does not turn in the reverse direction, but remains in the base material | Minimal space required behind panel (only 15 mm) | The component can be attached with wood screws or chipboard screws | The plasterboard plug and the screw can be inserted with the same bit | The lathe centre enables easy positioning and drilling into the panel | For installation, we recommend the ASSY®-D screw | ® | Notice | To attach the component, use the ASSY®-D ∅4.5 mm- plug screw or a wood/particle board screw without drill bit tip, counter thread or ring thread

Use in damp areas in combination with a stainless steel screw

Type K made from fibreglass-reinforced plastic is suitable for standard gypsum panels | To attach the component, use the ASSY®-D ∅4.5 mm- plug screw or a wood/particle board screw without drill bit tip, counter thread or ring thread | ® | Use in damp areas in combination with a stainless steel screw | Type K made from fibreglass-reinforced plastic is suitable for standard gypsum panels | Application area | Coat rails | Coat rails | Coat rails | Coat rails | Press anchor tips into attachment surface
Screw in anchor until flush
Mount component | Press anchor tips into attachment surface | Press anchor tips into attachment surface | Press anchor tips into attachment surface | Screw in anchor until flush | Screw in anchor until flush | Screw in anchor until flush | Mount component | Mount component | Mount component
Application
Application area | For attaching light items to plasterboard, ideal in combination with the ASSY®-D 4.5 mm-diameter screw

Can be used with every 1/4 inch drive bit | For attaching light items to plasterboard, ideal in combination with the ASSY®-D 4.5 mm-diameter screw | ® | Can be used with every 1/4 inch drive bit
Tehnical Information
Type description: W-GS/K | Anchor length (l) (l): 33 mm | Material: Plastic | Required particle-board screw diameter: 4.5 – 5 mm | Hole diameter in component (d Bau): 6.5 mm | Minimum component thickness (d): 9.5 mm | Max. attachment height (d a) – condition (da): Dependent on screw length | Min. temperature resistance: -40 °C | Max. temperature resistance: 80 °C | Edge clearance (a r): 50 mm | Centre-to-centre distance (a): 100 mm | Anchor diameter [mm]: Type K | Gypsum plasterboard d ≥ = 25 mm: 0,1 | Gypsum fibreboard: – | Gypsum plasterboard d ≥ = 25 mm: 0,12 | Gypsum fibreboard: –