Description

Specification
Female thread anchor with collar and metric thread for economical anchoring in concrete, zinc plated steel | Small drill hole depth

High load-bearing capacities

Visual setting check and hand protection when installing with the marking/spreading tool

Mechanical setting tool makes installation quicker and easier

Immediate load-bearing capacity — no waiting

Attached part can easily be removed at any time

W-ED/S has collar enabling anchor to be installed flush with the surface and preventing it slipping further into the drill hole (safer installation)

The attached part can be anchored with a fastening screw or a threaded rod

No installation torque required | Small drill hole depth | High load-bearing capacities | Visual setting check and hand protection when installing with the marking/spreading tool | Mechanical setting tool makes installation quicker and easier | Immediate load-bearing capacity — no waiting | Attached part can easily be removed at any time | W-ED/S has collar enabling anchor to be installed flush with the surface and preventing it slipping further into the drill hole (safer installation) | The attached part can be anchored with a fastening screw or a threaded rod | No installation torque required | Proof of Performance | ETA-02/0044 for individual fixing point, option 7, uncracked concrete

ETA-05/0120 for anchors in a redundant non-structural system, uncracked and cracked concrete

Fire resistance: F30, F60, F90 and F120; exposure to fire according to DIN 4102-2:1977-09 (UTTC – uniform temperature time curve)

ETA-05/0120 for anchors in a redundant non-structural system, uncracked and cracked concrete

Fire resistance: F30, F60, F90 and F120; exposure to fire according to DIN 4102-2:1977-09 (UTTC – uniform temperature time curve)

Anchors in a redundant non-structural system: Anchorage of non-load-bearing systems (cracked and uncracked concrete)

Suitable for fastening threaded rods, metal structures, metal profiles, lattices, cable conduits, pipes, mounting rails etc.

For use in concrete < C20/25 and pressure-resistant natural stone (without approval) W-ED/S, W-ED/S-BND and W-ED M5 may only be used in dry indoor conditions | Individual fixing point: Normal weight concrete C20/25 to C50/60 (uncracked concrete) | Anchors in a redundant non-structural system: Anchorage of non-load-bearing systems (cracked and uncracked concrete) | Suitable for fastening threaded rods, metal structures, metal profiles, lattices, cable conduits, pipes, mounting rails etc. | For use in concrete < C20/25 and pressure-resistant natural stone (without approval) | W-ED/S, W-ED/S-BND and W-ED M5 may only be used in dry indoor conditions Tehnical Information
Anchor diameter: 8 mm | Anchor length (L H): 40 mm | Min./max. required screw-in depth: 9-20 mm | Material: Steel | Surface: Zinc plated | Nominal drill-bit diameter (d 0): 10 mm | Drill hole depth (h 0): 40 mm | Effective anchoring depth (h ef): 40 mm | Torque during anchoring (T inst): 8 Nm | Through-hole in the component to be connected (d f): 9 mm