Description
Specification
For quick and easy installation in gypsum plasterboard/gypsum fibreboard, without pre-drilling and without additional setting tool | High die-cast zinc quality
Attachment via mechanical interlock
Rapid installation, no setting tool or pre-drilling required, with cordless screwdriver and suitable bit for the relevant screw
The drive allows the anchor to be inserted using a PZ, AW or TX bit, as the hexagon head transfers the load
Minimal space required behind panel (only 15 mm)
The component can be attached with wood screws or chipboard screws
The plasterboard plug and the screw can be inserted with the same bit
The lathe centre enables easy positioning and drilling into the panel
For installation, we recommend the ASSY®-D screw | High die-cast zinc quality | Attachment via mechanical interlock | Rapid installation, no setting tool or pre-drilling required, with cordless screwdriver and suitable bit for the relevant screw | The drive allows the anchor to be inserted using a PZ, AW or TX bit, as the hexagon head transfers the load | Minimal space required behind panel (only 15 mm) | The component can be attached with wood screws or chipboard screws | The plasterboard plug and the screw can be inserted with the same bit | The lathe centre enables easy positioning and drilling into the panel | For installation, we recommend the ASSY®-D screw | ® | Notice | To attach the component, use the ASSY®-D 4.5 mm ∅ screw or a wood/particle board screw without drill tip, counter thread or ring thread
Type Z/L recommended for use on double panelling | To attach the component, use the ASSY®-D 4.5 mm ∅ screw or a wood/particle board screw without drill tip, counter thread or ring thread | ® | Type Z/L recommended for use on double panelling | Application area | Coat rails
cable ducts
Hand towel rail | Coat rails | Coat rails | Coat rails | cable ducts | cable ducts | Hand towel rail | Hand towel rail | Press anchor tips into attachment surface
Screw in anchor until flush
Mount component | Press anchor tips into attachment surface | Press anchor tips into attachment surface | Press anchor tips into attachment surface | Screw in anchor until flush | Screw in anchor until flush | Screw in anchor until flush | Mount component | Mount component | Mount component
Application
Application area | For attaching light components to gypsum plasterboard, gypsum fibreboard and lightweight panels, ideal in combination with the ASSY®-D 4.5 mm ∅ screw
Use in damp areas in combination with a stainless steel screw
Can be used with every 1/4 inch drive bit | For attaching light components to gypsum plasterboard, gypsum fibreboard and lightweight panels, ideal in combination with the ASSY®-D 4.5 mm ∅ screw | ® | Use in damp areas in combination with a stainless steel screw | Can be used with every 1/4 inch drive bit
Tehnical Information
Type description: W-GS/ZD-L | Anchor length (l): 39 mm | Material: Die-cast zinc | Required particle-board screw diameter: 4.5 mm | Hole diameter in component (d Bau): 6.5 mm | Minimum component thickness (d): 9.5 mm | Max. attachment height (d a) – condition: Dependent on screw length | Min. temperature resistance: -40 °C | Max. temperature resistance: 80 °C | Edge clearance (a r): 50 mm | Centre-to-centre distance (a): 100 mm
