Description

Specification
For mounting insulation panels in concrete made of zinc plated steel. Tested fire resistance | Permitted loads under exposure to fire R30; R60; R90; R120

Tested fire resistance

When attaching soft insulation materials that are not self-supporting, the insulation washer is simply pushed onto the insulation dowel

Two-part design for fast, secure assembly

Knock-in shaft has the design of a clamping sleeve and braces along the entire installation depth in the drill hole

Anchor head surface is suitable as plaster base | Permitted loads under exposure to fire R30; R60; R90; R120 | Tested fire resistance | When attaching soft insulation materials that are not self-supporting, the insulation washer is simply pushed onto the insulation dowel | Two-part design for fast, secure assembly | Knock-in shaft has the design of a clamping sleeve and braces along the entire installation depth in the drill hole | Anchor head surface is suitable as plaster base | Notice | The insulation panels must be fastened with at least 4 anchors per square metre. | Application area
Application
Application area | With a German construction permit, the anchor may be used in a multiple attachment configuration to anchor insulation panels in cracked and non-cracked standard concrete with a strength class of at least C20/25 and max. C50/60.
Tehnical Information
Disc diameter: 80 mm | Internal diameter: 9 mm | Material: Steel | Surface: Hot dip galvanized | Anchor diameter (mm): 8 | R60; Fperm [kN]2): 0,07 | R90; Fperm [kN]2): 0,07 | R120; Fperm [kN]2): 0,06