Description
Specification
The first 6-series plastic anchor with ETA for multiple attachment in concrete. With pre-assembled countersunk head screw made of zinc plated steel | Reliable post-spreading characteristics | Enabled by geometry of the SymCon plug screw | Increased load introduction | Screwing in the SymCon screw results in optimum compression of the plastic of the wall plug body (almost no back-cut) | Improved load transfer | Even, continuous load distribution across the entire expansion area | Low assembly workload | Pre-assembled wall plug body and special screw | The hammer-in stop prevents premature expansion of the anchor during installation | Anchorage via friction locking between wall plug body and anchoring base | The wall plug body is made of high-quality polyamide | Proof of Performance | W-UR 6 SymCon and W-UR F 6 SymCon (galvanised steel): European Technical Approval ETA-11/0309. | The anchor has European Technical Approval for use in multiple attachment of non-load-bearing systems (e.g. suspended ceilings etc.). | Anchoring base with approval: Standard concrete ≥ C12/15
Anchoring bases without approval: Solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and blocks made of lightweight concrete
Installation temperatures: Temperature of anchoring base:≥ –20°C Temperature of wall plug body:≥ 0°C | Anchoring base with approval: Standard concrete ≥ C12/15 | Anchoring bases without approval: Solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and blocks made of lightweight concrete | Installation temperatures: Temperature of anchoring base:≥ –20°C Temperature of wall plug body:≥ 0°C | Notice | Drill cuttings must be removed from the drill hole. | Application area | Create the drill hole
Clean the drill hole
Set anchor and screw
Screw in the screw
Screw in screw until flush | Create the drill hole | Create the drill hole | Clean the drill hole | Clean the drill hole | Set anchor and screw | Set anchor and screw | Screw in the screw | Screw in the screw | Screw in screw until flush | Screw in screw until flush | W-UR 6 SymCon and W-UR F 6 SymCon (galvanised steel): European Technical Approval ETA-11/0309. | The anchor has European Technical Approval for use in multiple attachment of non-load-bearing systems (e.g. suspended ceilings etc.). | Anchoring base with approval: Standard concrete ≥ C12/15
Anchoring bases without approval: Solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and blocks made of lightweight concrete
Installation temperatures: Temperature of anchoring base:≥ –20°C Temperature of wall plug body:≥ 0°C | Anchoring base with approval: Standard concrete ≥ C12/15 | Anchoring bases without approval: Solid brick, solid sand-lime brick, vertically perforated brick, hollow sand-lime brick, hollow lightweight concrete blocks, solid bricks and blocks made of lightweight concrete | Installation temperatures: Temperature of anchoring base:≥ –20°C Temperature of wall plug body:≥ 0°C
Application
Application area | Suitable for attaching ceiling substructures (made of wood or steel), wooden laths, metal rails, suspended ceilings, angle brackets, profiles etc.
Tehnical Information
Anchor diameter: 6 mm | Anchor length (l): 80 mm | Nominal drill-bit diameter (d 0): 6 mm | Through-hole in the component to be connected (d f): 6.5 mm | Material of screw: Steel | Internal drive: AW20 | Surface of the screw: Zinc plated | Drill hole depth (h 1): 60 mm | Approval: ETA-11/0309 | Type description: W-UR 6 SymCon, countersunk head screw | ≥ C16/20: 40 | ≥ C16/20: 40 | ≥ C16/20: 40
