Description
Specification
Universal cavity anchor with pull tie for metric screws, suitable for all plate thicknesses (10 to 51 mm). Can be applied without a setting tool | Good holding power due to large load application surface
Universal clamping range
Simple and easy installation without setting tool
Immediate load-bearing capacity – no waiting
All metric screw head shapes possible
Screw can be released | Good holding power due to large load application surface | Universal clamping range | Simple and easy installation without setting tool | Immediate load-bearing capacity – no waiting | All metric screw head shapes possible | Screw can be released | Notice | Useful information: | Loads must be introduced into lightweight partition walls in accordance with DIN 18183-1:2009-05 relating to partitions and facings with gypsum boards on metal framing. | Application area | Pipe suspensions
Wall-mounted cabinets
Air-conditioning units for indoors | Pipe suspensions | Pipe suspensions | Wall-mounted cabinets | Wall-mounted cabinets | Air-conditioning units for indoors | Air-conditioning units for indoors | Create the drill hole
Thread anchor rail through the drill hole
1. Fix anchors using pull tie
2. Push the plastic ring forwards to the anchor base
Open pull tie and tear it off
Secure component | Create the drill hole | Create the drill hole | Create the drill hole | Thread anchor rail through the drill hole | Thread anchor rail through the drill hole | Thread anchor rail through the drill hole | 1. Fix anchors using pull tie
2. Push the plastic ring forwards to the anchor base | 1. Fix anchors using pull tie
2. Push the plastic ring forwards to the anchor base | 1. Fix anchors using pull tie | 2. Push the plastic ring forwards to the anchor base | Open pull tie and tear it off | Open pull tie and tear it off | Open pull tie and tear it off | Secure component | Secure component | Secure component
Application
Application area | Can be used for cavity attachments with M5/M6/M8 metric screws in gypsum plasterboard, boards, hard particle boards and perforated brick ceilings with a material thickness of up to 51 mm
For attaching components such as lightweight brackets, lamps, rails, switches, shelves, signs etc. | Can be used for cavity attachments with M5/M6/M8 metric screws in gypsum plasterboard, boards, hard particle boards and perforated brick ceilings with a material thickness of up to 51 mm | For attaching components such as lightweight brackets, lamps, rails, switches, shelves, signs etc.
Tehnical Information
Type description: W-HR 6 | Thread type x anchor diameter: M6 | Min./max. board thickness/mirror thickness (d a): 10-51 mm | Material: Steel / plastic | Nominal drill-bit diameter (d 0): 12 mm | Surface: Zinc plated | Through-hole in the component to be connected (d f): 7 mm
