Description

Specification
With fast assembly and proven performance, this product offers an all-round solution for fastening light loads using push-through installation. Wall plug body with flat collar nail made from A2 stainless steel | Quick, cost-effective installation

Can be removed via drive in screw head

Pre-assembled with matching screw

Suitable for in-place installation

Defined integrated hammer-in stop prevents premature expansion

For countersunk and protruding finish

Rot-resistant (plastic anchor made of high-quality polyamide)

Resistant to UV rays

For any light-load fittings in interior finishing as well as wood, metal, plumbing and electrical applications, e.g. securing angle brackets, panels, metal sheets, cable ducts and any components for non-recessed installation | Can be used in concrete and masonry | For any light-load fittings in interior finishing as well as wood, metal, plumbing and electrical applications, e.g. securing angle brackets, panels, metal sheets, cable ducts and any components for non-recessed installation
Tehnical Information
Anchor diameter: 6 mm | Anchor length (l): 40 mm | Max. attachment height (t fix): 10 mm | Embedding depth (h nom): 30 mm | Nominal drill-bit diameter (d 0): 6 mm | Drill hole depth (h 1): 35 mm | Hole diameter in component (d f): 6.5 mm | Material of nail: Stainless steel A2 | Surface: Plain | Tightening torque (T inst): 6 Nm | Internal drive: Z2