Description

Specification
For quick and economic mounting of light attachment parts in all solid materials, galv. steel | Quick, easy installation

Hardened spring steel

Component is held by the collar

Immediate load-bearing capacity

For use in push-through installation

Better thermal properties than polyamide anchors | Quick, easy installation | Hardened spring steel | Component is held by the collar | Immediate load-bearing capacity | For use in push-through installation | Better thermal properties than polyamide anchors | Application area | Stop bars | Stop bars | Stop bars | Drill the hole
Knock in securing sleeve with mason’s mallet until flush | Drill the hole | Drill the hole | Knock in securing sleeve with mason’s mallet until flush | Knock in securing sleeve with mason’s mallet until flush
Application
Application area | For secondary fastening in interior finishing

Outdoors for secondary attachments that are only required for short periods, e.g. building security

Can be used in concrete ≥ B25, solid brick, solid sand-lime brick, hard natural stone | For secondary fastening in interior finishing | Outdoors for secondary attachments that are only required for short periods, e.g. building security | Can be used in concrete ≥ B25, solid brick, solid sand-lime brick, hard natural stone
Tehnical Information
Anchor diameter: 8 mm | Length (l): 110 mm | Max. attachment height (d a) (da): 70 mm | Embedding depth (h s): 40 mm | Nominal drill-bit diameter (d 0): 8 mm | Edge clearance (a r): 50 mm | Centre-to-centre distance (a): 80 mm | Minimum component thickness (d): 80 mm | Drill hole depth (t): 45 mm | Hole diameter in component (d Bau): 8.8 mm