Description

High-quality, physiologically safe anti-friction and release agent
Contains highly concentrated, high-quality silicone oils

Optimum sliding and lubricating properties

Prevents sticking and wear

Eliminates unpleasant squeaking noises

Extremely high degree of temperature resistance from -50 °C to +250 °C

Wide range of applications, even in high temperatures and for use as a mould release agent

Colourless, non-discolouring

Good material compatibility

Moisture repellent

Protects e.g. rubber parts against frost

Notice
NSF H1

The product may come into contact with foodstuffs for technical reasons.

If used in areas in which food is processed or stored, only the minimum quantity technically required may be used. If the product is to be used as an anti-corrosive film, it must be completely removed before the device in question is used again.

NSF H1-registered (no.: 135927), meets the requirements of USDA 1998 H1.

The usage instructions are recommendations based on the tests we have conducted and on our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We ensure the consistent quality of our products. We reserve the right to make technical changes and further develop products.